深圳市知用电子有限公司
ShenZhen ZhiYong Electronics Co., Ltd.
CPL2000 (2000A/10KHz)
CPL2000 (2000A/10KHz)

Bandwidth(-3dB)DC~10kHz

Max testing current 200Arms 2000Arms

Peak value current 300Apk 3000Apk

浏览次数:605
说明书: 产品说明书

1.Summary
CPL2000 is a type of current probe that can test AC and DC simultaneously. The current under test can reach maximum value 2000Arms, peak value 3000Apk, bandwidth 10 kHz (-3dB). With two range selection (200A and 2000A optional), users can choose the proper range according to the current value; with auto zero function, users can make use of CPL2000 easily, and the power and battery low voltage alarm indication light and overload alarm buzzer equipped can notify the users fast. Also, CPL2000 can be powered by battery or external power supply. Its standard BNC output port allows it to connect with oscilloscope and other devices, including multi-meter by BNC to Double Banana plug. CPL2000 is usually used in fields including power frequency measurement, motor drive and power suppy.

Adapter CK-612
BNC Output cable CK-310/320
9V battery

1、Electronics Characteristics 
Test Condition:  23℃, 60RH, no nearby current, cable under test through the center during testing, load impedance 1MΩ

  Range200A2000A
Max testing current 200Arms 2000Arms
Peak value current 300Apk 3000Apk
Range Sensitivity 10mV/A 1mV/A
Typical Accuracy DC45Hz~66Hz) ±2%rdg.±5mV        ±2%rdg.±1mV
Bandwidth-3dB DC~10kHz
Operating voltage  CATII 600V
Typical battery type and service life 9V alkaline cascade battery/ 15 hour
Low power indication light Lighted red when battery voltage is lower than 6.5 V
Overload indication Buzzer will be activated when current under test surpass the range